1-4 Cell Lithium Polymer Charger

A very nice charger for higher capacity lithium polymer batteries. This charger auto detects the number of cells in the Li-Po pack and the user sets the charge current using a push button - no fiddly jumpers to set (or lose!). Charging is initiated using another push button and when charge cycle is complete an alarm sounds and charging stops. Charges 1-4 cells at one of the following currents: 0.3A, 0.5A, 0.8A, 1.3A, 2.0A or 2.5A. LED indicators for number of cells, charge current, power and charge. Requires 11-15V input (crocodile clips) and the Li-Po is connected via a standard JST 2 pin plug. Housed in aluminium case measuring just L=105mm, W=45mm and H=20mm. Not recommended for our 90, 130 or 145mAh cells.


Sold Out

To be notified when this product is back in stock please click here.

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “1-4 Cell Lithium Polymer Charger” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!

Web design by Rocket Design. Copyright © 2003-2020 Atomic Workshop